CZ DUTY 4.0 C
Specs at a glance
About this product
Most of what moves through this catalog is AR-15 parts: lowers, parts kits, rails and the small pieces that finish a rifle. A factory-built handgun belongs next to that work, and CZ's new DUTY 4.0 is the one we picked. It is a striker-fired 9x19mm service pistol with a fiberglass-reinforced polymer frame, a 4-inch barrel and a slide cut for direct-mount red dots. The serial number sits on an internal chassis, so the grip frame around it is a modular part rather than the registered gun.
Two sizes cover the line. The C compact runs 15+1 rounds, or 17+1 with the extended base plate, and stands 135 mm tall at 770 g. The F full-size carries 17+1, 19+1 extended, at 780 g with a taller 143 mm grip. MS models add a thumb safety lever on top of the firing pin block, trigger safety and trigger bar safety. Trigger pull is a refined SFDA at roughly 5.6 lbs with a 4 mm reset. MSRP is $729.
Under the DUTY name sits a serialized modular chassis, a 1.3 in (33 mm) wide fiberglass-reinforced polymer frame, a 4-inch barrel and a trigger CZ rates at 25 ± 4 N (5.6 ± 0.9 lbs) with a 0.16 in (4 mm) reset. The slide is optics-ready by direct mount rather than an adapter plate. Fixed sights come standard, and the barrel is not threaded.
This is the shorter grip of the two DUTY frames: 5.3 in (135 mm) from the top of the slide to the base plate, 27.2 oz (770 g) empty, 15+1 rounds standard and 17+1 with the extended plate. The slide and 4-inch barrel are the same as the full-size gun, so it shoots like one.
The standard model skips the external safety and keeps the three passive ones: firing pin block, trigger safety and drawbar safety. Same chassis, same trigger and slide as the MS; only the lever is missing.
Best fit: concealed carry where your state allows it, home defense, and range time that does not need a full-size grip. Shooters coming from a CZ 75 will recognize the grip angle; shooters coming from any other striker gun will notice the trigger first.
Like every complete firearm we list, the DUTY 4.0 ships to the FFL dealer you name at checkout, not to your door. Your dealer runs the transfer paperwork and applies whatever rules your state sets for a handgun before handing it over. Pick a dealer you already use, or ask one near you whether they accept inbound transfers, and enter their details with the order.
Specifications
| Caliber | 9x19mm (9mm Luger) |
| Magazine capacity | 15+1 (17+1 with the extended base plate) |
| Barrel length | 102 mm (4 in) |
| Overall length | 188 mm (7.4 in) |
| Width | 33 mm (1.3 in) |
| Height | 135 mm (5.3 in) |
| Weight (empty magazine) | 770 g (27.2 oz) |
| Frame | fiberglass-reinforced polymer |
| Trigger | SFDA striker-fired |
| Trigger pull | 25 ± 4 N (5.6 ± 0.9 lbs) |
| Trigger reset | 4 mm (0.16 in) |
| Trigger travel | 9 ± 1 mm (0.4 ± 0.04 in) |
| Safeties | Firing pin block, trigger safety, trigger bar safety |
| Sights | Fixed |
| Threaded barrel | No |
| Optics | Direct-mount optics ready |
| Manufacturer | CZ (Česká zbrojovka) |
| MSRP | $729 |
Frequently asked questions
- Is the DUTY 4.0 slide cut for a red dot?
- Yes, the slide takes direct-mount optics, and CZ's photos show Holosun, Aimpoint and Shield dots fitted. Fixed iron sights come standard.
- Which part of the DUTY 4.0 carries the serial number?
- The internal chassis is the serialized component. The polymer grip frame around it is modular and is not the registered part.
- Does the CZ DUTY 4.0 C take CZ P-10 magazines?
- CZ lists the DUTY with its own 15-round magazine and an extended base plate for 17+1. P-10 magazine fit is not confirmed, so plan on DUTY magazines.
- Is the compact easy to shoot?
- It shares the 4-inch barrel and slide with the full-size gun, so the sight radius is the same. Only the grip is shorter.